Accordion Menu Using jQuery

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Untitled Document

Jointing Instruction

Cutting iconCut the pipe straight (Very important). This will allow the pipe to bottom socket.
  • iconRemove burr, use Clean dry cloth or knife, Do not use abrasive material.
  • iconClean pipe and fitting & ensure no dirt or any other foreign matter.
  • iconCheck dry fit.
Solvent iconApply a thin coat of cement into the fitting's socket and a full even coat
             on the pipe to the depth of socket bottom.
Jointing iconInsert pipe into the socket quickly while cement is still fluid(wet).
  • Note : If cement has dried, recoat pipe and fitting.
  • iconHold pipe and fitting together (30 second).
  • iconWipe off excess cement with dry cloth.